Download How to Add Cameras According to Each CMS via ONVIF, Milestone Xprotect PDF

TitleHow to Add Cameras According to Each CMS via ONVIF, Milestone Xprotect
TagsPort (Computer Networking) Transmission Control Protocol Hypertext Transfer Protocol Password Networking Standards
File Size6.8 MB
Total Pages51
Document Text Contents
Page 1

0

`



How to add cameras according to each CMS via ONVIF, RTSP


ONVIF_ver0.00.09



CMS

company
Product Version Protocol page

If you can't access stream of camera using Onvif, Please check the following two conditions. 1

1
Milestone
(Server /Client) XProtect Go ver2.0a ONVIF 2

2
GeoVision GV-NVR ver8.5

ONVIF 8

3 RTP/RTSP 11

4 NUUO ver3.5.20 ONVIF 15

5 Digifort Enterprise ver6.5 ONVIF 20

6 ExacqVision ExacqVision Client ver4.8.11 RTP/RTSP 24

7 Luxriot Luxriot ver2.0.2.1530 ONVIF 26

8 Axxon AxxonSmart CMS ver2.1.1 ONVIF 35

9 Qnap ONVIF 39

10 Mirasys DVMS ver5.12.4 ONVIF 43

11 EverMedia NV5000 Series ver7.7.0.0.127SP4 RTP/RTSP 47

Page 2

1

`

If you can't access stream of camera using Onvif, Please check the following two conditions.



- First, Unckeck "Use Security on Onvif" and Save








- Second, Unckeck "Use Authentication" and Save

Page 25

24

`

6. How to add camera on ExacqVision CMS via RTP/RTSP



1. Start ExacqVision Client

2. Make sure that server is connected (Add Server)






3. IP camera -> fill in username / password



4. Hostname/IP Address -> rtsp://<IP address>/stream1 (i.e rtsp://10.1.10.10/stream1)



5. Click “Apply”



6. Make sure that camera is connected

Page 26

25

`

7. Camera Recording Setup -> Make sure that “video detected” appeared as “Yes”






8. Select the camera that you registered. You will see live picture like below.

Page 50

49

`

Motion Recording

1. Go to “Setup” and “Recording”






2. Click “Advanced”

Page 51

50

`

3. Select “Region”

Similer Documents