Download ONGC_Approved Vendor List_Rev 8.2 PDF

TitleONGC_Approved Vendor List_Rev 8.2
File Size635.3 KB
Total Pages68
Document Text Contents
Page 1

Offshore Design Section,

Offshore Engineering Services

ISO: 9001-2008

OFFSHORE SUGGESTED VENDOR LIST

Rev No: 8.2

S. No. Discipline Page No.

1 Important Notes 2

2 Piping 3-19

3
Mechanical and Rotary

Equipment
20-31

4 Safety 32-33

5 Instrumentation 34-48

6 Electrical 49-58

7 Pipeline 59-62

8 Structural 63-64

9 Architectural 65-67

10 Prescribed Proforma 68

Offshore Suggested Vendor List of Offshore Engineering Services,

ONGC as on 28.06.2016

INDEX

28.06.2016

Page 2

Offshore Design Section,
Offshore Engineering Services

ISO: 9001-2008
OFFSHORE SUGGESTED VENDOR LIST

Rev 8.2

1

B1
On Hold due to Non-submission of Name change / Other documents by the
vendor to ONGC

B2 On Hold due to No response from the vendor

B3
On Hold due to Poor / Negative Performance Feedback received against
the vendor from ONGC Asset.

3

6

7

8

5

Important Notes

Vendors with no remark in this list are confirmed vendors.

The 'On Hold ' status for vendors has been categorised into following groups:

2

4

The reasons for which a vendor has been put 'On Hold' have been marked
against the vendor as B1, B2 & B3.

Vendors, who are traders, have been identified

The contractor can continue to get quotation from vendors who are 'On Hold'
under group 'B1 ', provided that the reasons for which a vendor has been put 'on
hold' are resolved by the vendor at the time of submission of Purchase
Specification (PS)

Vendors in Group 'B2' will be delisted automatically in case No-response is
received from Vendor.However,the LSTK contractors are free to contact these
vendors, if they repond to them.

The 'On Hold' status of a vendor under group 'B3 ' in this Suggested Vendor List
means that the contractor shall not place order(s) on the vendor for the product
for which the vendor has been put 'On Hold' by ONGC.

c) Manufacturing locations established in India by an Indian Company can also be
considered for supply provided such Indian Company forms a Joint venture
registered in India with:
1. an enlisted foreign vendor in the suggested vendor list.
2. any foreign vendor who is not enlisted but meets the qualification criteria for
vendor enlistment.
Above arrangement shall be considered subject to meeting the following
requirements:
(i) Undertaking in the prescribed proforma from both the partners shall be
submitted.
(ii) The manufacturing location established in India shall possess all the
accreditations required for the product and also comply with the functional
specifications.
(iii) Factory inspection may be carried out to ascertain the capability of the Joint
Venture Company.
(iv) In the event of collapse of such joint venture arrangement, supply from the
JV company shall not be accepted.

# indicates change over previous Suggested Vendor List

a) Manufacturing locations of MNC vendors other than the enlisted location in the
Suggested Vendor List, can also be accepted for supply of product after obtaining
an Undertaking in the prescribed proforma from Principal/ enlisted vendor. Such
manufacturing locations shall possess all accreditations required for the product
and comply with the Functional specification.

Vendor should agree to comply with ONGC Terms & Conditions for Supply of
Spares

Vendor should agree / guarantee supply of spares for the entire life cycle of the
item / equipment (i.e. 7 years in case of electronic equipment/items and 10 years
in case of mechanical equipment/items)

b) For any vendor, where the Purchase Orders are to be placed on marketing
offices authorized by the enlisted vendor, the Purchase Specification shall be
accepted from the enlisted vendor and the product shall be accepted from the
enlisted manufacturing location.

28.06.2016

Page 34

Offshore Design Section,

Offshore Engineering Services

ISO: 9001-2008

OFFSHORE SUGGESTED VENDOR LIST

Rev No: 8.2

Instrumentation

Instrumentation

Product 1 Pressure Gauges ^

S. No. Country Remark/Note

1 UK

2 Germany/India

3 USA

4 USA

5 India

6 India #

7 India

8 USA

Product 2 Diff. Pressure Gauges & Indicators ^

S. No. Country Remark/Note

1 UK

2 Germany/India

3 France

4 UK

5 USA

6 USA

7 India #

8 India

9 USA

Product 3 Telemetry Interface Cabinet ^

S. No. Country Remark/Note

1 India

2 Japan/India

3 USA On Hold-B1

4 India

Product 4 ^

S. No. Country Remark/Note

1 USA On Hold-B1

2 USA

Vendor

Budenberg Gauge Co. Ltd.

e-production solution

WT Petrotech

Wika Alexander Wiegand SE & Co. KG,

Germany &

Wika Instruments India Pvt. Limited, India

Baumer Technologies India Pvt Ltd

ITT Barton

Ametek

Vendor

Fabricon, Mumbai

Vendor

Aschcroft

Manometer

Gauges Bourdon (India) Pvt Ltd

Budenberg Gauge Co. Ltd

Wika Alexander Wiegand SE & Co. KG,

Germany &

Wika Instruments India Pvt. Limited, India

Burdon

Vendor

Baumer Technologies India Pvt Ltd

Cameron Technology UK Ltd

Meriam Process Technologies

Aschcroft

Gauges Bourdon (India) Pvt Ltd

Well Fire Shutdown Panel & Test Separator Shutdown

Panel-Packaged Item

ITT Barton

Yokogawa

e-production solution

Elec. Mech. Corporation, Mumbai

# indicates changes from Rev 8.1

34 28.06.2016

Page 35

Offshore Design Section,

Offshore Engineering Services

ISO: 9001-2008

OFFSHORE SUGGESTED VENDOR LIST

Rev No: 8.2

Instrumentation

3 Singapore

4 UK On Hold-B3

5 Singapore

6 Singapore

7 Netherlands

8 UAE

9 Singapore

10 UAE

11 UAE

Product 5 Distributed Control System (DCS) ^

S. No. Country Remark/Note

1 USA, India

2 Japan

3 India

4 Japan

5
USA/UK/

Singapore/India

6 India

7 USA, India

Product 6 ^

S. No. Country Remark/Note

1 USA On Hold-B1

2 USA/BATAM

3 USA

4 USA

Product 7 Pressure Switches (Explosion Proof) ^

S. No. Country Remark/Note

1 USA

2 USA

3 USA

4 Japan

5 UK

6 USA On Hold-B1

7 India On Hold-B3

Vendor

SOR

Ruelco

Vendor

Aschcroft

Yokogawa

e-Productions solution

Dag Process

Delta Controls

e-Productions solution

WT Petrotech

ITT Neo Dyn

Halliburton Energy

Yokogawa

Foxboro (Invensys)

Emerson Process Management

Yokogawa India Ltd

ABB

Pneumatic Pressure Switch/HI-LO Pilots (Indicating dial

type)

Toshiba

Honeywell Automation India Ltd (HAIL)

S.A.Technologies Pte.Ltd

Wilmax Controls System Pte.Ltd

Vendor

Proserv Middle East

Petronash FZE, Dubai

Controls and Electrics (Boustead) Pte Ltd

Haven Automation

Wormald

Frames Energy Systems

Sulaiman Petrotech ME FZE

# indicates changes from Rev 8.1

35 28.06.2016

Page 67

Offshore Design Section,

Offshore Engineering Services

ISO: 9001-2008

OFFSHORE SUGGESTED VENDOR LIST

Rev No:8.2

Architectural Items

3 Netherlands

4 Korea

5 Korea

Product 12 B-15 Fire Rated Door ^

S. No. Country Remark/Note

1 Dubai

2 UK

3 Netherlands

4 UK

5 Sweden

6 Uk

7 Korea

8 Korea

Product 13 A-60 Fire Rated Window ^

S. No. Country Remark/Note

1 Korea

2 Norway

3 Korea

Product 14 A-0 Fire Rated Rolling Shutter ^

S. No. Country Remark/Note

1

Product 15 Insulation ^

S. No. Country Remark/Note

1 India

2 Denmark

3 Korea

4 UK

***********

Keumkang Chemicals

Thermal Ceramics

Vendor

Lloyd Insulation (I) Ltd. N Delhi

Atlas Door

Vendor

Samgong Co Ltd

Nordam A/S

Jung Gong Co.

Vendor

Rockwool A/S

BD System

STACO (Shinsung Total Accommodation

System)

Sung Mi Geun Cheul

Booth Engineering Ltd.

Mech Tools Engineering

IMAC

STACO (Shinsung Total Accommodation

System)

Van Dam

Vendor

Specialist Services

Sung Mi Geun Cheul

Van Dam

# indicates changes from Rev 8.1

67 28.06.2016

Page 68

Offshore Engineering Services
ISO: 9001-2008

OFFSHORE SUGGESTED VENDOR LIST

Rev No: 8.2
Prescibed Profoma

PROFORMA OF UNDERTAKING (Refer Important Notes Clause 5(a))
(from the enlisted vendor)

We <name of the Principal/ enlisted vendor with location> declare that the < name of the vendor with
location to be accepted> is our 100% subsidiary unit.

We guarantee that < name of the vendor to be accepted> shall follow the same design,
manufacturing, quality processes and testing standards of the <name of product> as that of the <
name of the Enlisted vendor in Suggested Vendor List>.

And < name of the vendor to be accepted > shall comply with the Functional Specification.

We also stand warranty for the item supplied for a period of ____ years.

We guarantee for supply of spares and provide maintenance support in India for the entire life cycle of
the item / equipment (i.e. 7 years in case of electronic equipment/ items and 10 years in case of
mechanical equipment/ items).

(Authorized Signatory of Principal/enlisted vendor)
PROFORMA OF UNDERTAKING (Refer Important Notes Clause 5(c))

(from enlisted vendor/ from foreign partner who meets the enlistment criteria)
We <name of the Principal/enlisted vendor/ foreign partner who meets the enlistment criteria with
location> declare that the < name of the partner in India> is our Joint venture partner in India with our
_____% stake.
We guarantee that < name of the joint venture to be accepted> shall follow the same design,
manufacturing, quality processes and testing standards of the <name of product> as that of the <
name of the Enlisted vendor in Suggested Vendor List/ foreign partner who meets the enlistment
criteria >.
And < name of the joint venture to be accepted > shall comply with the Functional Specification.

We agree for the Factory inspection to ascertain the capability of <name of Joint Venture Company>.

We also stand warranty for the item supplied for a period of ____years.
We guarantee for supply of spares and provide maintenance support in India for the entire life cycle of
the item / equipment (i.e. 7 years in case of electronic equipment/ items and 10 years in case of
mechanical equipment/ items).

(Authorized Signatory of Principal/enlisted vendor/foreign partner who meets the enlistment criteria)

PROFORMA OF UNDERTAKING (Refer Important Notes Clause 5(c ))
(from Indian partner)

We <name of the Indian partner> declare that the < name of the enlisted vendor/ foreign partner who
meets the enlistment criteria > is our Joint venture partner in India with our ______% stake.
We guarantee that < name of the joint venture to be accepted > shall follow the same design,
manufacturing, quality processes and testing standards of the <name of product> as that of the <
name of the Enlisted vendor in Suggested Vendor List/ foreign partner who meets the enlistment
criteria >.
And < name of the joint venture to be accepted > shall comply with the Functional Specification.

We agree for the Factory inspection to ascertain the capability of <name of Joint Venture Company>.

We also stand warranty for the item supplied for a period of _____years.
We guarantee for supply of spares and provide maintenance support in India for the entire life cycle of
the item / equipment (i.e. 7 years in case of electronic equipment/ items and 10 years in case of
mechanical equipment/ items).

(Authorized Signatory of Indian Partner)


68
28.06.2016

Similer Documents